Q & A - Samsung WF-R1061/YLP Service Manual

13-5. Q & A
NO. Type Part
1 DRUM appear
WASHER ance part
(MODE
NAME :
Q1*3*)
2 DRUM appear
WASHER ance part
(MODEL
NAME :
Q1*3*)
3 DRUM appear
WASHER ance part
(MODEL
NAME :
Q1*3*)
4 DRUM appear
WASHER ance part
(MODEL
NAME :
Q1*3*)
5 DRUM display
WASHER part
(MODEL
NAME :
Q1*3*)
6 DRUM display
WASHER part
(MODEL
NAME :
Q1*3*)
7 DRUM display
WASHER part
(MODEL
NAME :
Q1*3*)
8 DRUM display
WASHER part
(MODEL
NAME :
Q1*3*)
9 DRUM door re
WASHER lated
(MODEL
NAME :
Q1*3*)
10 DRUM a noise
WASHER
(MODEL
NAME :
Q1*3*)
Situation Solution
method
Being opened & closed AS rere
bad/Being attached & commended
detached bad
Label(sticker) being consulting
detached
Accessories being not AS rere
included commended
Color coming off/rust AS rere
commended
Display part being not lit AS rere
up/ not being cleared commended
Character being broken AS rere
on display commen
ded
Display not being cleared AS rere
commen
ded
Display malfunction AS rere
commen
ded
Door sensor not being Others
detected
A noise being occurred General
intermittently during consulting
washing
Before consulting cause
In case of
a cover not
being
opened
or closed
...for the specifi ca
tion or label of
product lead the
customer to attach
diretly or send the
engineer to do so.
For other advertise
ment or PR label it
may not be at
tached.
..Check whether the
componets are
same as those in
the manual. If not
contact to SVC.
It may be oc
curred when
the machine
is installed in
the humid
place which
causes the
rust or dis
coloring.
It is a
symptom
occurred
when it is in
stalled in the
humid place
or the water
is entered its
inside.
Please check
whether a
washer is
installed and
used with
removing
the safety
device posi
tioned at its
rear.
60
Management
Door is not opened during washing. For models
applied with the boiling or drying the door will not
open until the interior temperature decreases
to a certain safe level. In other cases you are
recommended our engineer's inspection.
Is it the label for advertisement? Is it the label
for standards or attentions? If it is for advertise-
ment it does not matter for the function or the
use even though it is not attached since it is not
related to the function and use. If it is for st
Sir we really apologize to you for the inconven-
ience that we made from our product which was
bought by you on the basis of your trust in us.
We will try our best to clear your inconvenience
(by mail).
Being rust or being discolored during the use is
normal and natural according to the times and
its use.(except the case occurred at the innitial
purchase). The replacement of case will be
charged and in order to prevent the corrosion
change the location
Dry the front operation part a little with the drier
and you are recommended our engineer's
inspection if it does not work even after doing so.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
You are recommended our engineer's inspection
if the safety device is removed and there is no
foreign material such a coin or pin inside.