Samsung WF-R1061/YLP Service Manual page 14

Basic model wf-f1061
Table of Contents

Advertisement

8) Fuzzy washing function (weight-sensing)
After fi nishing initial water supply, when the fall of the water level needs supplementary water supply,
Sensing function perceives the weight with the supplementary water supply numbers and starts to
work. Under the course of Cotton, or Coloureds, if the supplementary water supply numbers become
over 2 times the function is going at default condition ( high water level ), if 1 time that is going at
middle level, if 0 below low water level, heating hours and rinse hours depend on the above data.
ECO PRE mode is selected, the process going on at default condition.
High
Middle
Low
After sensing weight, above hours is decreased from above default hours
9) Bubble - detecting function
At the each condition of washing&dehydrating , rinse&dehydrating , hydrating, bubble -detecting function
works, this function works 5times normally, if the function detects bubbles at 6 times , the bubble-detecting function
stops and go on to the next process.
The bubble-detecting function during washing & dehydrating to rinse & dehydrating
after 2 times instant dehydrating and before main dehydrating, if the water level is under 24.50KHZ,
Bubble
→ Detecting function thinks there are bubbles and add the bubbles-removing rinse, needing
hours are above hours and 8 Min 40 sec.
→ The bubble-detecting function during single hydrating process
after 2 times instant dehydrating and before main dehydrating , if the water level is 24.50KHZ below or
during main dehydrating, water level data is 24.50KHZ below Bubble-detecting function thinks there are
bubbles and add the bubbles-removing rinse 1 times, needing hours are above hours and 5 min 50 sec.
Bubble-detecting function operating process
laundry scattering
draining &reverse
50 sec
Cotton
Default
Default-20 min
Default-30 min
18 sec
unbalance
detecting range
Washing hours
Coloureds
Default
Default-10min
Default-15min
220rpm
(default water level 24.50KHZ below)
11
Rinse water level
23.80KHZ
24.10KHZ
500rpm
bubble detection
Default

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R861/ylpWf-r861/ylpWf-r1061Wf-r861Wf-f1061

Table of Contents