Samsung WF-R1061/YLP Service Manual page 67

39 DRUM 11E : front
WASHER loading
(MODEL washing
NAME : machine
Q1*3*) error
40 DRUM door : front
WASHER loading
(MODEL washing
NAME : machine
Q1*3*) error
41 DRUM front
WASHER loading
(MODEL washing
NAME : machine
Q1*3*) error
42 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
43 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
44 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
45 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
46 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
47 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
48 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
49 DRUM water
WASHER supply
(MODEL related
NAME :
Q1*3*)
E9 Water leakage ERR AS rerecom-
mended
Ed:Door being not opened AS rerecom-
mended
E6:Overheating error AS rerecom-
mended
Cold water being not General
supplied consulting
Water being supplied little General
consulting
Detergent being remained General
consulting
Water being stopped dur- General
ing the coming in consulting
Clothes being damaged General
consulting
One direction rotation
Rotation being not worked
after it sounds with buzz
Water being not supplied
in winter
Check
whether there
is foreign ma-
terial inserted
in the drain
fi lter.
It may appear
when the the
door is opened
a certain
minutes after
the completion
of washing or
the electricity
is interrupted
in running.
Check of Bad
contact of 1st
door opening
sensor----
*check of
the bending
of 2nd door
switch*Do not
open the door
It may appear
when the
temperarture
rises rapidly.
It may appear
when the tap
is not opened
properly or
there is a for-
eign material
inside.
It may appear
when the long-
term used
detergent is
not well sol-
uted or when
the water
temperature
is low during
winter.
It may appear
when the
water is cut
or the water
supply hole is
clogged.
It may appear
when the tap
and the water
supply hose
are frozen if it
is used at the
veranda in the
winter.
64
In this case you are recommended our
engineer's inspection.
There is a cover dettachable at the front bottom.
Pull out the cover to fi nd the handle to open at
the right side. Pull out the handle to open the
door.
In this case you are recommended our
engineer's inspection.
Check fi rst whether the water supply is cut
and also check whether the foreign material is
inserted. If the foreign material is inserted turn
the connection hose of machine to the left to
disconnect and to fi nd the strainer to trap the
foreign material.
Is it checked whether the tap is fully open or
there is a foreign material inserted? First check
whether the tap is fully open. And there is no
fault turn the hose of the machine to the left to
take out strainer in the hole of water entrance.
Clean i
Sove the detergent wth the hot water and put it
inot the washing box.
If it is not solved even with the normal detergent
request an engineer's inspection.
Is it checked whether the water is cut or there is
a foreign material inserted in the water supply
hole? First check whether the water is cut and
if there is a blackout push the power button on.
Otherwise turn the machine hose to the left to
take out t
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
In this case you are recommended our
engineer's inspection.
Make the water supply hole warm and defreeze
it with wet towel.