Table of Contents
Advertisement
3-3. MAIN FUNCTION
1) Auto power S/W off function
●
After power on, the auto power S/W off function automatically switches power off for you if you do not
press selection button for 10 minutes
● After selecting the function, the auto power S/W off function automatically switches power off for you if
you do not press start/pause button for 10 minutes
● until 5 minutes past, After fi nishing the last function, the auto power S/W off function automatically
switches power off for you if you do not re-select the course button or manual button
2) Door open function
●
Door just can be opened at water level 24.80 KHz over, water temperature 55
power is off door is not opened (only auto-door model)
● If door is open during the operating, all operating is halted, and door error message will be displayed
(2-digit panel displays "dE" 4-digit panel displays "door") and error melody will coming out
● Door open error can be cleared by closing the door. the operating keeps going on
3) Rinse hold function
●
If rinse hold function selected, the operating is fi nished , the machine do not drain the water after last
rinse
4) No spin function
●
If no spin function selected, the operating is fi nished after last rinse
5) Drain function
●
Drain function is over, after pumping out the water for 2 minutes , without motor rotating
6) Pre-washing function
●
Pre-washing function can be selected ,when you choice the following mode; cotton, coloreds, syn
thetics, delicates, baby cotton, baby coloreds, baby delicates, baby stains
● Water level/reverse time is the same with the selected course
● Pre-washing takes about 16 minutes
7) Power-out compensation function
● If power is out on selected process, the process before power out is stored to EEPROM, once power is
back the process before power out continues.
● When power is back, washing process starts from the process at the point of the power out, rinse/drain
process starts from the initial process.
START
SAVE DATA
to EEPROM
POWER-OUT COMPENSATION FUNCTION PROCESS
WASHING
POWER OUT
POWER BACK
MICOM RESTORE
RINSE/DRAIN
START
SAVE DATA
to EEPROM
10
below, motor off, if
RINSE/DRAIN
PROCESS
POWER OUT
POWER BACK
MICOM RESTORE
FINISH
Hide quick links:
Advertisement
Table of Contents
