Integrated Peripherals - Gigabyte GA-8I915ME Series User Manual

2-3

Integrated Peripherals

On-Chip Primary PCI IDE
On-Chip SATA Mode
x PATA IDE Set to
SATA Port 0/2 Set to
USB Controller
USB 2.0 Controller
USB Keyboard Support
USB Mouse Support
AC97 Audio
Onboard H/W LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
: Move Enter: Select
F5: Previous Values
On-Chip Primary PCI IDE
Enabled
Disabled
On-Chip SATA Mode
Disabled
Auto
Combined
Enhanced
Non-Combined
PATA IDE Set to
Ch.1 Master/Slave
Ch.0 Master/Slave
SATA Port 0/2 Set to
This value will auto make by the setting "On-Chip SATA Mode" and "PATA IDE Set to".
If PATA IDE were set to Ch. 1 Master/Slave, this function will auto set to Ch. 0 Master/Slave.
USB Controller
Enabled
Disabled
USB 2.0 Controller
Disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
GA-8I915ME Series Motherboard
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
[Enabled]
[Enhanced]
Ch.0 Master/Slave
Ch.2 Master/Slave
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
3
+/-/PU/PD: Value
F6: Fail-Save Default
Enable onboard 1st channel IDE port. (Default value)
Disable onboard 1st channel IDE port.
Disable this function.
BIOS will auto detect.
Set On-Chip SATA mode to Combined, you can use up to 4 HDDs on
the motherboard; 2 for SATA and the other for PATA IDE.
Set On-Chip SATA mode to Enhanced, the motherboard allows up to 6
HDDs to use.(Default value)
Set On-Chip SATA mode to Non-Combined, SATA will be simulated to
PATA mode.
Set PATA IDE to Ch. 1 Master/Slave. (Default value)
Set PATA IDE to Ch. 0 Master/Slave.
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB 2.0 Controller. (Default value)
Disable USB 2.0 Controller.
- 40 -
Item Help
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help