Reversing The Ice Box Door Opening Direction - Westinghouse WIM1000 User Manual

REvERSiNg icE BoX dooR opENiNg diREctioN
–ModEL wiM1200
If the position your fridge occupies would be better suited to a
reverse opening arrangement, carefully follow these diagrams
and instructions. The reversing of doors or replacement of light
bulbs is not covered by warranty. Assistance, if required can be
arranged by calling our service centre on 13 13 49. Normal
service call and labour charges apply.
pREcAUtioNS
• Turn off the appliance
• Unplug the power cable
Push a flat bladed screwdriver up into the slot at the angle
illustrated to release the plastic pin securing the ice box door.
At the same time, pull the ice box door forward to release both
the door and the pin from the ice box.
Rotate the door for reverse opening.
Remove plug to open shaft for pin to go in. Insert plug into the
empty pin cavity on the other side.
Insert the node on the top of the door into the hinging hole
in the top of the fridge liner.
With the plastic pin pushed onto the bottom node on
the ice box door and held in place, push the pin into the
hole on the ice box frame until the clasp on the pin locks
it into position.
door reversal accessories
13