Table of Contents
Advertisement
Available languages
Available languages
13.9.2 Using the remote operation
•
Call your machine, the unit will turn on after 10 rings and you will hear the OGM
message.
•
After the beep, slowly dial the Security code, you will hear one short beeps for
confirmation.
•
Enter the next codes to use the desired function.
#1
Broadcast the next message
#2
Broadcast the previous message
#3
Delete the actual message
#4
To stop the operation
#5
To broadcast the outgoing message (Press */# to stop)
#7
To broadcast the message (Press */# to stop)
#8
To broadcast all messages
#9
To broadcast the new messages
#0
Exit the remote control
*1
To change OGM1
*2
To change OGM2
*3
To set the special incoming number. Enter the number and press # to confirm. The
number will be broadcasted for confirmation
*4
To set the monitor function OFF, when the monitor function is on, you can hear the
noise in the room nearby the telephone
*5
To set the monitor function ON
14 Technical Data
Dialing mode:
Flash:
Caller ID:
Total recording time:
Batteries:
Power supply:
Ambient temperature:
Permitted relative air humidity:
Topcom Allure 270
Tone (DTMF)
100/300/600ms
DTMF/FSK
17 minutes (including OGM, ICM and Conversation
recording time)
3 x 1.5V, AAA non-rechargeable
DC 9V
+5 °C to +45 °C
25 to 85 %
Topcom Allure 270
17
Advertisement
Chapters
Table of Contents
