Table of Contents
Advertisement
Touchscreen controller
Built into touch screen frame
Externally accessible for firmware updates
Video Controller board
Requires standard VGA
Auto sync on power up and any video mode change. Video Modes supported:
When there is no VGA signal present, it will show "No Signal message" within 1 second and the
LED over the power button (B1) will go amber.
Pezio function – LX1250TI only
Function: provides audio warning signals
Location: Rear of display.
To use Buzzer:
Apply a 500hz-1khz, 500mv-1V sign wave to the Audio Input signals. Duration of the signal controls
perceived volume (1ms minimum @1khz,2ms minimum @500hz).
Mechanical enclosure
Function: provides support for internal components and EMI cage
Rugged.
Material: Aluminum
Designed for IP67
Powder coated enclosure
Front Bezel
Material Aluminum
Color: Black
Connectors and I/O
Connector Location: To be located on the back of the monitor facing the rear unless otherwise noted.
I/O connector – LX1250TI
Manufacture: Glenair; Mighty Mouse
Part number: 801-011-07M13-37PA
Description 37 pin, round
Recommended Mating connector: 801-007-16M13-37SA
Resolution Vertical refresh
rate
1024*768 60 Hz
800*600
60 Hz
640*480
60Hz
More available
LX1250TI User Manual
27
Advertisement
Table of Contents
