Advertisement
Quick Links
LX1200
LX1200
Thank you for choosing Planar's LX1200
QUICK START GUIDE
LCD touchscreen monitor.
Customer Service:
To view online documentation and frequently
asked questions, or to send an email to our
technical support staff , please visit:
http://www.planar.com/support or call
1-866-PLANAR1 (1-866-752-6271).
To receive advanced notifi cation of product
updates, please register your monitor at
www.planar.com/support.
Planar is one of the world's most accomplished
providers of fl at-panel displays, with over 20
AFTER INSTALLATION IS COMPLETE,
years' expertise in fl at-panel innovation. The
PLEASE LEAVE IN VEHICLE
company provides the most dependable display
solutions for various applications in industrial,
medical, and commercial markets.
Installation
ATTENTION: Install touchscreen driver prior to
3. Cable Connections -
making cable connections to your PC.
(Sold separately. Refer to the diagram below)
1. USB Type B Upstream
2. VGA Video Cable
1. Recommended Mounting -
3. 12V Power Input
• Planar recommends an approved mount
4. 3.5mm Audio Input Cable
for in-vehicle use.
5. Remote PC Shutdown/Start control
2. Touchscreen Set-up -
• Refer to the User's Guide for touch set-up
cable
(See User's Guide)
4. Power Up -
instructions.
• Connect the video and power cables. The
unit will display a test screen as soon as
power is applied.
• Power up the computer.
- See the User's Guide for the LX1200 at
www.planar.com/support for
Keyboard
(optional)
advanced set-up instructions.
12V
Power Source
5. SoftKey Set-up -
USB
VGA
• Refer to the User's Guide for SoftKey
Remote PC Shutdown/Start
set-up instructions.
Audio
6. Cleaning -
Computer
• Use a clean cloth to clean the display. If
cleaning fl uid is required, mild detergent
or IPA can be used, if applied to the cloth
fi rst.
Features and User Controls
• 2-Port USB Hub
8. LED Status Light
• Red - Standby mode. No video signal
• Video Blanking for Privacy
• Green - The display is receiving a video
• Bezel mounted button controls the
signal from the computer.
Remote PC
• Amber - The display has been dimmed to
off . Turn the dimming dial up to see the
1. USB Type A
display.
2. Dimming Dial
• Adjust brightness by turning the dial.
Turn off the backlight for video blanking
by turning the dial clockwise.
3. Remote PC Shutdown/Start Button
• This button doesn't turn off the monitor
directly. When connected to a docking
station it will act as the power button for
the computer. When the computer is
turned off , the LED will turn red and the
monitor will go into standby. See User's
Guide for more detail
4. Autosync
5. Instant Off backlight switch
6. Programmable SoftKey Macro Buttons
7. Speaker Volume
6
3
4 5
7
• Adjust speaker volume by turning the dial.
1
2
Package Overview
Contents -
LCD Display
Landing Strip
Touchscreen Driver and
Planar SoftKey Software
CD-ROM
Important Recycle Instruction -
LCD Lamp(s) inside this product contain mercury. This
product may contain other electronic waste that can be
hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information,
contact the Electronic Industries Alliance at
WWW.EIAE.ORG.
For
lamp specifi c disposal information check
WWW.LAMPRECYCLE.ORG.
The test results show that this device meets the FCC rules. Refer to the product operation manual for FCC clas-
sifi cation found at: http://www.planar.com/support. Those limits are set to protect residential areas from the
8
devices with harmful emission. This device will produce, use and radiate radio frequency energy. In addition,
failure to follow the user's manual to install or use this device might produce harmful interference with radio
communication. Notwithstanding the foregoing, it does not guarantee that this type of harmful interference
does not occur in some special installations. The interference caused by this device to the reception of radio
or television signals may be verifi ed by turning it on and off . Any changes or modifi cations to this TFT LCD
would void the user's authority to operate this device.
020-0451-01A
36.65401G001 Ver. A
Advertisement
