Page 2
The Directives state that all new products within its scope, placed on the European market after July 1, 2006 must be compliant with its requirements. Planar Systems Inc. is fully in support of and compliant with EU Directive 2002/95/EC and Directive 2011/65/EU for applicable products within its scope.
Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic fi eld. - In direct sunlight. LA1500R User’s Guide (020-0319-04 Rev. A)
Auto-adjustment function Multilingual OSD user controls VESA DPMS power saving VESA rear mounting 75mm x 75mm standard Operating temperature = 5°C to 35°C Storage temperature = -20°C to 60°C LA1500R User’s Guide (020-0319-04 Rev. A)
Page 9
1024 x 768 resolution and make sure timing of the display mode is compat- ible with the LCD panel. “Video Modes” of this LCD panel are listed in the appendices for your reference. LA1500R User’s Guide (020-0319-04 Rev. A)
Page 10
Figure 1.1 LA1500R User’s Guide (020-0319-04 Rev. A)
2. Increases value of the adjustment items. Power Switch Switches on/off the power of the LCD display. Power LED 1. Green indicates the display is turned on. 2. Amber indicates the display is in power-saving mode. LA1500R User’s Guide (020-0319-04 Rev. A)
Choose the adjustment items by pressing the “+” and “-” buttons. The OSD menu will automatically close, if you have left it idle for a pre-set amount of time. LA1500R User’s Guide (020-0319-04 Rev. A)
Adjustment-Red red color of the display. Color It allows you to adjust the 0-100 Adjustment-Green green color of the display. Color It allows you to adjust the 0-100 Adjustment-Blue blue color of the display. LA1500R User’s Guide (020-0319-04 Rev. A)
Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or visit Planar Support at www.planar.com/support. See support contact information on rear cover. Problem: No image appears on screen.
If you see warning messages on your LCD screen, this means that the LCD display cannot receive a clean signal from the computer graphics card. There may be three sources for this problem. Please check the cable connections or contact Planar for more information. No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card.
800 x 600 37.9 VESA SVGA 800 x 600 48.1 VESA SVGA 800 x 600 46.9 VESA XGA 1024 x 768 48.4 VESA XGA 1024 x 768 56.5 VESA XGA 1024 x 768 60.0 LA1500R User’s Guide (020-0319-04 Rev. A)
Planar Support Cables and Accessories To find cables and accessories for your Planar monitor, touch screen or other Planar products visit our online store at www.PlanarOnline.com. Technical Support Visit Planar at http://www.planar.com/support for operations manuals, touchscreen drivers, warranty information and access to Planar's Technical Library for online trouble shooting.