Planar la1550ts lcd monitor user manual (20 pages)
Summary of Contents for Planar LA1500R
Page 1
LA1500R, LA1500RTR and LA1500RTC USER’S GUIDE www.planar.com...
Page 2
A Planar part number will be modifi ed with an “LF” suffi x designation to indicate RoHS compliance, as shown on the part number label affi xed to the display and on the box containing the display.
❑ Do not operate the product under the following conditions: - Extremely hot, cold or humid environment. - Areas susceptible to excessive dust and dirt. - Near any appliance generating a strong magnetic fi eld. - In direct sunlight. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Introduction About Planar’s LA1500R / LA1500RTR / LA1500RTC The LA15 products all have a 15” fl at panel screen with an active matrix, thin-fi lm transistor (TFT) liquid crystal display (LCD). Features include: ❑ Direct analog graphics signal input ❑ Active matrix TFT LCD technology ❑...
Page 7
❑ Durability: 225 million touches in a single location ❑ Hardness: Cannot be scratched using any stylus with Mohr’s rating of less than 6.5 ❑ Transmissivity: up to 88% at 550 nm ❑ Driver: Windows® 95/98/Me/NT/2000/XP, Linux LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Page 11
768 resolution and make sure timing of the display mode is compat- ible with the LCD panel. “Video Modes” of this LCD panel are listed in the appendices for your reference. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Page 12
Figure 1.1 LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Power Switch Switches on/off the power of the LCD display. 1. Green indicates the display is Power LED turned on. 2. Amber indicates the display is in power-saving mode. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
3. Adjust the value of the adjustment items by pressing the “ ” button. 4. The OSD menu will automatically close, if you have left it idle for a pre-set amount of time. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
OSD. ◆ Other Setup Opens the Other Setup sub-menu where you can adjust the Smooth, OSD Position, OSD Transparency, OSD Time Out, Volume and Mode Message parameters. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Page 16
Minimizes any horizontal distortion and clears or sharpens the displayed characters. ◆ Horizontal Position Changes the horizontal position of the image. ◆ Vertical Position Changes the vertical position of the image. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Page 17
◆ Volume Adjusts the sound volume. ◆ Mode Message Enables or disables the display of information. ◆ Reset Resets the display parameters back to its factory default settings. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Troubleshooting If you are experiencing trouble with the LCD display, refer to the following. If the problem persists, please contact your local dealer or visit Planar Support at www.planar.com/support. See support contact information on rear cover. Problem: No image appears on screen.
LCD display. When the signal is not included in the “Video Modes” list we have listed in the Appendices of this manual, the LCD display will display this message. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Other combinations are possible, but may require adjustments to the image. For the optimal performance, set your computer to a screen resolution of 1024 x 768 at a 60 Hz refresh rate. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
7. If the touch screen driver does not automatically load, restart the computer operating system. Please read “Readme.txt” located in the unzipped fi le folder for additional information and assistance. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Page 26
7. If the touch screen driver does not automatically load, restart the computer operating system. Please read “Readme.txt” located in the unzipped fi le folder for additional information and assistance. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Page 27
6. If the touch screen driver does not automatically load, restart the computer operating system. Please read “Readme.txt” located in the unzipped fi le folder for addition- al information and assistance. LA1500R, LA1500RTR and LA1500RTC User’s Guide ( 020-0319-01 Rev. A)
Support and Service Planar is a US company based in Beaverton, Oregon and Espoo, Finland with a worldwide sales distribution network. Visit Planar at http://www.planar.com/support for product registration, operations manuals, line drawings, touch screen drivers, warranty information and access to Planar’s Technical Library for online troubleshooting.