Ltr - Radio Shack 20-162 User Manual

Note: You cannot use partial talk groups
in Decimal Mode. (See "Selecting the EDACS
Talk Group ID Format" on p. 66.)
You can program a specific talk group such as 01-
011 into the scan list memory. In AFS Mode, you
can program the talk groups for an entire agency
by pressing corresponding keys.
For example:
Press
0 1 . ENT/PGM
0 1 . 0 1 ENT/PGM
To enter a Partial EDACS ID:
1. Enter the agency number you want to store.
Press •/DELAY to enter the dash.
2. Press ENT/PGM.
Or you can program all the talk group numbers
for one fleet of an agency.
1. Enter the agency number.
2. Press •/DELAY to enter the dash.
3. Enter the fleet number.
4. Press ENT/PGM.

LTR

Users on an LTR system are assigned to specific
talk groups, which are identified by the scanner
as a six-digit number. The number is in the form
AHHUUU, where:
A = Area code (0 to 1)
H = Home repeater (01 through 20)
U = User ID (000 through 254)
Trunk Scanning
To Scan
all 01 groups
all 01 talk groups within
the 01 agency
55