Radio Shack 20-162 User Manual page 48

Trunk Scanning
5. Repeatedly press FUNC + TRUNK/MODE
to select MOT (Motorola), EDCS, LT, or EDCS
SCAT. This sets the talk group ID decoding
method to be used for the bank.
5. Press ENT/PGM to enter Programming Mode.
6. Enter the desired trunking frequency then
press ENT/PGM to store.
7. Press FUNC + TRUNK/MODE to select the
appropriate mode (MO, ED, or LT).
8. To enter additional trunking frequencies as
subsequent channels in the same bank, press
ENT/PGM or
channel. Repeat steps 6 and 7 to enter the
frequencies. (See "Programming Frequencies
into Channels" on p. 16).
9. Press SCAN to start scanning.
Notes:
• If you enter a frequency that has already been
entered, the scanner sounds an error tone
and displays "Duplicate Freq." and the channel
number. If the dual entry is an error press CL
and enter the correct frequency. If the dual
entry is intentional press ENT/PGM to accept.
PGM BNKO9
MOT mode
P MT ID–O: –––––
ID List: O
DLY
PGM O9–OO T+
866.3875 MO
P
Scan Bank O9
DLY
to access the next open
48
T+
ON