Memory Only Mode; Erasing Memories - Yaesu FT-90R Operating Manual

Memory-Only Mode
Once memory channel programming has been completed, you may place the radio
in a "Memory Only" mode, whereby VFO operation is impossible. This may be
particularly useful during public-service events where a number of operators may
be using the radio for first time, and ultimate simplicity of channel selection is
desired.
To place the radio into the Memory Only mode, turn it off. Now press and hold in
the [ VFO/MR ] button on the microphone (or whichever key you have assigned for
the V F O /M R function) while turning the radio on.
To return to normal operation, repeat the above power-on procedure.

Erasing Memories

With 186 total memories available, there frequently are situations where you may
desire to "erase" memories which are no longer needed.
To erase a memory:
1. Recall the memory to be erased. Note that Memory Channel 1 may not be
deleted, as it is the Priority Channel.
2. Press and hold the [ VFO/MR ] button on the microphone for one second.
3. Press the
Channel "1," and the previously-selected memory will now be eliminated from
the memory bank.
Important Note:
Erased memory channels can not be recovered.
FT-90R O
PERATING
Memory System Operation
button. This will cause the display to shift to Memory
M
ANUAL
37