Specifications - Yaesu FT-90R Operating Manual

Specifications

General
Frequency Ranges: RX: 100~230 MHz, 300~530 MHz, 810~999.975 MHz*
Channel Steps:
Emission Type:
Antenna Impedance:
Frequency Stability:
Operating Temp. Range: –20 °C to +60 °C
Supply Voltage:
Current Consumption (approx):
Case Size:
Weight:
* Cellular and digital telephone frequencies are blocked and cannot be restored.
Transmitter
RF Power Output:
Modulation Type:
Maximum Deviation:
Spurious Emissions:
Microphone Impedance: 2 k
Receiver
Circuit Type:
Intermediate Frequencies: 45.05 MHz and 455 kHz
Sensitivity:
Selectivity:
AF Output:
AF Output Impedance:
Specifications are subject to change without notice or obligation.
Specifications guaranteed only within the 2m and 70cm amateur bands.
Frequency range may very according to local requirements and regulations.
2
TX: 144-146 MHz or 144-148 MHz (144 MHz)
430-440 MHz or 430-450 MHz (430 MHz)
5/10/12.5/15/20/25/50 kHz
F3, F2, F1
50 , Unbalanced (Antenna Duplexer built-in)
±5 ppm (–5 °C to +60 °C)
DC 13.8 V ±15 %, Negative Ground
350 mA (Receive, Squelched)
9.5 A (Tx, 144 MHz)
8.5 A (Tx, 430 MHz)
100(W) x 30(H) x 138(D) mm (w/o knobs)
640 g (1.41 lb.)
50/20/10/5 W (144 MHz), 35/20/10/5 W (430 MHz)
Variable Reactance
±5 kHz
At least 60 dB below fundamental
Double-Conversion Superheterodyne
0.18 µV @12 dB SINAD
12 kHz/24 kHz (–6 dB/–60 dB)
2 W @ 8 for 10 % THD
4 – 16
FT-90R O
PERATING
M
ANUAL