Yaesu FT-90R Operating Manual page 11

...
VFO/MR Button
This button switches operation between the VFO and Memory modes.
†
LOCK Switch
Slide this switch upward to lock (disable) the microphone's buttons.
‡
LAMP Switch
Slide this switch upward to activate the keypad's illumination, for easier view-
ing at night.
ˆ
K
(MH-36
EYPAD
These 16 keys generate DTMF tones during transmission.
In the receive mode, these 16 keys can be used for direct frequency entry and/
or direct numeric recall of Memory channels.
‰
P1 Button
This button selects the Tone Squelch type: CTCSS, DCS, BELL, or Off (no
tone).
Š
P2 Button
This key selects the transmitter power output level:
HIGH, MID1 (Medium 1), MID2 (Medium 2), or LOW.
Note: The functions of the ACC, P1, and P2 buttons can be changed via the
M system. See page 47.
ENU
The MH-42
A6J
clude a DTMF keypad.
FT-90R O
PERATING
Microphone Switches
only)
A6J
MH-42
Hand Microphone
A6J
is similar to the MH-36
M
ANUAL
, but the MH-42
A6J
does not in-
A6J
9