Connecting To Your Computer; Parallel Interface - Pentax PocketJet User Manual

Connecting to Your Computer

You can connect the printer to your computer by using:
◆ The parallel interface cable supplied with the complete
◆ The optional RS-232C serial interface cable. See
◆ The optional infrared adapter. See "Optional Infrared
◆ The optional interface cables for Macintosh PowerBook
For information about what type of printer connection your
computer has and about connecting your computer to a
printer, see the documentation that came with your
computer.

Parallel Interface

Setting Up the Printer
printer kit. See "Parallel Interface" below.
"Optional Serial Interface" on page 20.
Interface" on page 22.
and Newton computers and for many Personal Digital
Assistants (PDAs), palmtops and pen-based systems. See
pages 59 and 60.
Make sure your printer is off before installing the
interface cable.
Take the printer end of the cable and hold it so the
notched metal surface is facing up.
Insert the printer end of the cable into the interface
connector on the side of the printer. See Figure 12 on
page 20.
CAUTION: Always insert and remove the interface
cable gently. Press the latching devices on each side
of the interface connector when removing the cable.
Insert the other end of the cable into the appropriate
connector on your computer.
19