Guide to Imprinting Letterhead
PocketJet thermal paper can be imprinted with colored
logos or graphics prior to being printed in a PocketJet.
Here are some guidelines for commercial printers.
◆ Use only water-based inks.
◆ Use low-tack ink to avoid pick and backside offset.
◆ Backside printing is possible with a few limitations. Light
blues or blacks with a 25% screen or less should work
without causing the printer to hesitate or stop.
◆ Avoid exposure to solvents, either in printing or in storage.
◆ Flexo presses are recommended. When thermal paper is
printed on offset presses, sticking and offsetting problems
may occur.
Contact Pentax for more details about imprinting
letterhead or backside printing.
36
Pentax PocketJet Printer User's Guide