Printing A Self-Test Sheet - Pentax PocketJet User Manual

Printing a Self-Test Sheet

compartment is toward you.
a push pin or paper clip, gently
move DIP switch 3 away from you
to the ON position.
main switch once quickly to turn the
printer on. The red POWER indicator lights
up. (If you are using the battery, the green
BATTERY indicator also lights up.) See
Figure 9.
into the paper input slot. Place the print side of the
paper away from you, so that it faces the rear of the
printer. See Figure 10.
NOTE: You can print on only one side of thermal pa-
per. This is the smooth, coated side. For more
information, see "Tips on Using Paper" on page 33.
and prints the self-test image. See Figure 11.
The green DATA indicator light comes on and stays lit.
14
Make sure the printer is turned off.
Set the printer face down so that the battery
Using a pointed object such as
Turn the printer face up and press the
One quick press
Insert a sheet of the recommended thermal paper
After you insert the paper, the printer pulls it though
Pentax PocketJet Printer User's Guide
Red POWER light
FIGURE 9. Turning on the printer.
SW1
ON
OFF
Green BATTERY light