•
Hold. Place a call on hold by pressing the HOLD key
•
Resume. Resume call by pressing the HOLD key
•
Multiple calls. Automatically place active call on hold or switch between two calls by pressing the
FLASH key
call.
MUTE
During an active call, press the MUTE softkey to mute/unmute the microphone. The LCD will show "LINEx:
TALKING" or "LINEx: MUTE" to indicate the mute status, with Mute icon displayed on the right side of the
screen.
CALL TRANSFER
GXP1160/GXP1165 supports Blind Transfer, Attended Transfer and Auto-Attended Transfer.
•
Blind Transfer.
During the first active call, press TRANSFER key
Press SEND key
•
Attended Transfer.
During the first active call, press FLASH key
Enter the number for the second call and establish the call;
Press TRANSFER key
Press FLASH key
FIRMWARE VERSION 1.0.5.2
. Call waiting tone (stutter tone) will be audible on incoming call during the active
or # to complete transfer of active call.
;
to transfer the call.
GXP1160/GXP1165 USER MANUAL
;
again;
and dial the number to transfer to;
. The first call will be put on hold;
Page 20 of 59