Grandstream Networks HT701 User Manual page 33

Lock Keypad Update
Disable Voice Prompt
Disable Direct IP Call
Failover to FXO
Gateway
FXO Gateway
NTP server
Allow DHCP option 42
to override NTP serve
Syslog Server
FIRMWARE VERSION 1.0.3.1
Default is No. If set to "Yes", the configuration update via keypad is disabled.
Default is No. Disables the voice prompt configuration.
Default is No. Disables the Direct IP Call function.
Default is Disable. If Enabled, the unit will start routing the calls to the FXO Gateway
configured via Direct IP Call When it loses registration from your SIP Server. HT704 Only
The use of this option presumes a configured GXW410x or another FXO gateway with an
active PSTN line connection.
IP or Domain Name of the FXO Gateway that will be used as Failover. HT704 Only
URI or IP address of the NTP (Network Time Protocol) server. This parameter
synchronizes the date and time.
Default NO. Enables the DHCP server to handle the NTP Server via Option 42
The IP address or URL of System log server. This feature is especially useful for the ITSP
(Internet Telephone Service Provider)
HT70X USER MANUAL Page 33 of 52