AOpen MX3ZA User Manual page 24

Overview
1.9 Wake On Keyboard/Mouse
This function allows you to power on your system by clicking a hot key or a
mouse button that you specified. Besides, you can also disable the function of
the power button and only the preset keys (like a password) can boot your
system.
Please follow the procedure below to enable Wake on Keyboard/Mouse
function.
1. Set JP28 at pin 2-3 is to enable this function
2. Go to BIOS Setup
can select different wake up mode. For detailed information, please refer to
"Chapter 3 AWAED BIOS"
3. Save CMOS setup and Exit.
4. Successfully boot your system to Windows or DOS.
5. Now you can proceed the normal shutdown and next time you can use this
function to boot your system.
1-14
Integrated Peripherals Power On Function. You