Overview
1.3
ACPI Suspend to Hard Drive
For a detailed installation procedure please refer to the following procedure to
enable ACPI Suspend to Hard Drive on the AOpen MX3ZA motherboard. First
please check if your system meets the following requirements, then follow the
procedure step by step.
I. Fresh installation of Windows 98 on a new system
1. Execute "Setup.exe /p j" to install Windows 98
2. After Windows 98's installation is complete, go to the Control Panel -->
Power Management.
a. Set All Power Schemes to "Never".
b. Click on "Hibernate" and select "Enable Hibernate Support".
c. Click on the Advance tab and check the "Hibernate" box.
3. Clean boot into DOS and run "AOZVHDD /C /File" to create the suspend
hidden file.
4. Reboot system.
II. Changing from APM to ACPI (Windows 98 only)
1. Run "Regedit.exe"
a. Go through the following path
HKEY_LOCAL_MACHINE
SOFTWARE
MICROSOFT
b. Select "ADD Binary" and name it as "ACPIOPTION".
c. Right click and select Modify, add "01" after "0000" to make it "0000 01".
d. Save changes.
2. Select "Add New Hardware" under Control Panel. Allow Windows 98 to
detect new hardware. (It will find "ACPI BIOS" and remove "Plug and Play
BIOS")
1-8
WINDOWS
CURRENT VERSION
DETECT