Table of Contents
Advertisement
3. Reboot system.
4. Clean boot into DOS and run "AOZVHDD.EXE /C /File"
III. Changing from ACPI to APM
1. Run "Regedit.exe"
a. Go through the following path
HKEY_LOCAL_MACHINE
SOFTWARE
MICROSOFT
b. Right click and select "Modify, change "01" to "00" to make it "0000 02".
Note:
acknowledged but the ACPI function is disabled.
c. Save changes.
2. Select "Add New Hardware" under Control Panel. Allow Windows 98 to
detect new hardware. (It will find "Plug and Play BIOS" and remove "ACPI
BIOS")
3. Reboot system.
4. Run "Add New Hardware" again and it will find "Advanced Power
Management Resource".
5. Click "OK".
Note: currently we found only ATI 3D Rage Pro AGP
card would support ACPI suspend to disk; if you need
this function implemented be sure to use this card.
WINDOWS
CURRENT VERSION
DETECT
ACPI OPTION
"02"
means
Overview
Windows
98
is
ACPI
1-9
Advertisement
Table of Contents
