Route Table - SMC Networks Barricade SMC7401BRA User Manual

Route Table

This screen is used to manually configure static routes to other IP
networks, subnetworks, or hosts.
Parameter
Destination
Gateway
Netmask
Interface
Action
A destination network or specific host to which packets
can be routed.
The IP address of the router at the next hop to which
matching frames are forwarded.
The subnetwork associated with the destination.
This is a template that identifies the address bits in the
destination address used for routing to specific subnets.
Each bit that corresponds to a "1" is part of the network/
subnet number; each bit that corresponds to "0" is part of
the host number.
The local interface through which the next hop of this
route is reached. Values include:
cs0: Interface of Ethernet port.
ppp0: Interface of PVC when the PVC is set to PPP/
ATM mode.
lo0: Interface of the loopback driver.
Add or delete a route from the table.
A
DVANCED
Description
S
ETUP
3-23