Table of Contents
Advertisement
ID Source
MAC:
Destination
MAC:
Type:
Route Table
The [Route Table] page displays routing table and allows the
user to manually enter the routing entry. The routing table will
display the routing status of [Destination], [Netmask], [Gateway],
and [Interface].
The interface lo0 means the loopback interface.
The interface ppp1 means the PPP interface.
The Gateway is the learned Gateway.
When the bridge filtering is enabled, enter the [Source
MAC address], select [Block] and click [Add]. Then all
incoming WAN and LAN Ethernet packets matched
with this source MAC address will be filtered out. If the
[Forward] is selected, then the packets will be
forwarded to the destination PC.
When the bridge filtering is enabled, enter the
[Destination MAC address], select [Block] and click
[Add]. Then all incoming WAN and LAN Ethernet
packets matched with this destination MAC address
will be filtered out. [Forward] is selected, then the
packets will be forwarded to the destination PC.
Enter the [hexadecimal number] for the Ethernet type
field in Ethernet_II packets. For example, 0800 is for
IP protocol.
Entering the Admin Page
39
Advertisement
Table of Contents
