Predialing (On-Hook) - Nortel i2004 User Manual

Making a Call with On-Hook Dialing
Predialing allows you to verify the phone number dialed on the phone's display
before completing your call.
Predialing with your Handset
1. Enter the phone number (no dial tone will be heard).
2. Lift the HANDSET.
3. Replace the HANDSET to end the call (or press GOODBYE).
The primary line is used to place the call.
Predialing with your Headset or Handsfree Keys
1. Enter the phone number (no dial tone will be heard).
2. Press the HANDSFREE or HEADSET key and the call is routed to the appropriate speaker.
3. Press GOODBYE to end the call.
The primary line is used to place the call.
Pressing a LINE key after entering a phone number on the keypad will
automatically activate the HANDSFREE function on your phone. All the line
icons will appear as idle until you press a LINE, HEADSET or HANDSFREE key
or lift the HANDSET. (See Figure 12.)
If you make an error while entering the phone number, you do not have to cancel
the call. Just press the BKSPACE softkey to delete the entered numbers
individually, correct the entry, and complete your call.
Figure 12
i2004 Internet Telephone - User Guide • © 2000 • NTC51.00.02.24
Version 8-6 • Page 17