Transferring Calls; Voice Mailbox Transfer - Avaya T7208 User Manual

2.8 Transferring Calls

You can transfer a call to another extension.
1. During the call, press Feature 70. The call is put on hold.
2. Make a call to the transfer destination. Then do one of the following:
· To transfer the call without announcing it (an unsupervised or blind transfer) hang up or dial Feature 70
again. You can do this as soon as you hear ringing. The transfer is complete. If the call is not answered it will
be returned to your extension. When your extension rings, lift the handset to be reconnected to the caller.
· To announce the call before completing the transfer (a supervised transfer), wait for the call to be answered. If
the called party is willing to accept the call hang up or dial Feature 70 again. If no one answers or the call is
refused, press the button next to the fast flashing button to be reconnected to the original caller.

2.8.1 Voice Mailbox Transfer

You can transfer a caller to directly to an extension's voice mailbox for the caller to leave a message without first ringing
the extension. This feature is useful when you know that the extension user is not present and has not set do not disturb.
You can program a voice mailbox transfer button to transfer a caller directly to a voice mailbox by pressing the button and
then dialing the mailbox subscriber's extension number.
To Transfer a Caller Direct to a Mailbox
1. During the call press Feature 14.
2. Dial the two digit extension number of the extension for which the caller wants to leave a message. The caller is
routed to the mailbox and hears the recorded greeting for that mailbox.
3. Hang up.
Norstar Mode T7208 Phone User Guide
IP Office Basic Edition
Page 20
- Issue 4a (14 June 2012)