D Dtmf Transmission - Icom IC-F61M Instruction Manual

e Push [TX Code CH Select] to select the desred dgt to be ed-
ted.
r Push [CH Up]/[CH Down] to select the desred dgt.
t Push [TX Code CH Select] to set. The dgt to the rght wll blnk
automatcally.
y Repeat r and t to edt all allowable dgts.
u After edtng, push [TX Code CH Select] to set.
• Return to the stand-by mode.
i Push [Call] to transmt.
USING [TX CODE ENTER] KEY:
q After pushng [TX Code CH Select], push [CH Up]/[CH Down],
or push [TX Code CH Up]/[TX Code CH Down] to select the de-
sred TX code channel.
w Push [TX Code Enter] to enter the TX code edt mode.
• The dgt to be edted blnks.
e Push [TX Code Enter] to select the desred dgt to be edted.
r Push [CH Up]/[CH Down] to select the desred dgt.
t Push [TX Code Enter] to set. The dgt to the rght wll blnk au-
tomatcally.
y Repeat r and t to edt all allowable dgts.
u After edtng, push [TX Code Enter] to set.
• Return to the stand-by mode.
i Push [Call] to transmt.

D DTMF transmission

If the transcever has [DTMF Autodal] assgned to t, the automatc
DTMF transmsson functon s avalable. Up to 8 DTMF channels
are avalable.
q Push [DTMF Autodal]— a DTMF channel appears.
w Push [CH Up]/[CH Down] to select the desred DTMF channel.
e Push [DTMF Autodal] to transmt the DTMF code to the se-
lected DTMF channel.
BASIC OPERATION
3
3
18