BacklGht FunctOn; Aquaquake Water DraNNg FunctOn - Icom IC-GM651 Instruction Manual

n Backlight function
Ths functon lghts the functon dsplay and keys, and t s
convenent for a nghttme operaton. The backlght brght-
ness can be adjusted as follows.
➥ After pushng [F], push [3•
to adjust the brghtness of the dsplay and key backlght.
Then push [ENT].
• The backlght s adjustable n 7 levels and OFF.
Rotate
BACKLIGHT
SELECTOR
7
4 For DSC operation
When the backlght blnks durng DSC operaton (recevng
a call, [DISTRESS] s pushed and held, etc.), the backlght
level 7 (Max.) and OFF (Mn.) are repeated alternately re-
gardless of above settng.
After the blnkng stops, the backlght selects level "4" f the
backlght level has been set to OFF or 1 to 3.
• If the backlght level s set to 4 to 7, the settng level holds after the
blnkng stops.
] then rotate [SELECTOR]
DIM
25W INT
TAG
PLEASURE
n AquaQuake water draining function
The AquaQuake water dranng functon clears water away
from the speaker grll. Wthout ths functon, water may muf-
fle the sound comng from the speaker.
The IC-GM651 emts a low beep tone when ths functon s
actvated.
➥ Whle pushng and holdng [H/L], turn power ON to act-
vate the AquaQuake functon.
• You should contnue to push and hold [H/L] to dran water away
from the speaker grll after turnng power ON.
• "Aqua Quake" s dsplayed on the LCD when the AquaQuake
functon actvates.
• A low beep tone sounds whle [H/L] s pushed and held to dran
water, regardless of [VOL] control settng.
• The transcever never accepts a key operaton whle the Aqua-
Quake functon s actvated.
• After releasng [H/L], the transcever returns to the normal op-
eraton condton.
The AquaQuake functon should be actvated for about 5
sec. to sufficently clear water away from the speaker grll.
BASIC OPERATION
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
13