Call Channel ProgrammNg - Icom IC-GM651 Instruction Manual

3
BASIC OPERATION
n Call channel programming
You can program the call channel wth your most often-used
channels n each channel group for quck recall.
q Whle pushng and holdng [H/L], push [DIAL] several
tmes to select the desred channel group to be pro-
grammed.
Push +
H/L
w Push and hold [⁄6 • C] for 1 sec. to select the call channel
of the selected channel group.
• "CALL" and call channel number appear.
Push and hold
C
16
for 1 sec.
10
Appears
25W INT
DUP
TAG
DIAL
34°34.506N
123°23.236W
UTC 12:00 INTL
Appears
25W INT CALL
TAG
34°34.506N
123°23.236W
UTC 12:00 CALLING
e Push and hold [⁄6 • C] agan for 3 sec. (untl a long beep
changes to 2 short beeps) to enter call channel program-
mng condton.
• Channel number starts blnkng.
Push and hold
C
16
34°34.506N
for 3 sec.
123°23.236W
r Rotate [SELECTOR] to select the desred channel.
Rotate
SELECTOR
34°34.506N
123°23.236W
UTC 12:00
t Push [⁄6 • C] to program the dsplayed channel as the call
channel.
• Push [CLR] to cancel.
• The channel number stops blnkng.
C
Push
16
34°34.506N
123°23.236W
25W INT CALL
TAG
UTC 12:00 CALLING
25W INT CALL
DUP
TAG
INTL
25W INT CALL
DUP
TAG
UTC 12:00 INTL