Link Scan; Dial; Clr Ent - Icom IC-RX7 Instruction Manual

■ Link scan

q Push [SCAN] to start a link scan.
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction.
w Push [HOLD V] to stop the scan temporarily, if desired.
• Push and hold [v] or [w] for 1 sec. several times to select the
desired category; or push [v] or [w] several times to select the
desired group.
• Rotate [DIAL] to select the channel.
• Push [HOLD V] again to restart the scan.
NO. MENU

DIAL

CLR ENT
SQL MW
HOLD V
1 2 3
HOLD V
4 5 6
SCAN
SCAN
7 8 9
SEARCH
.
0
SKIP
ATT
• Scan mode indication
Arrow indicates
scanning direction
SEARCH AND SCAN OPERATIONS
The category/group link setting can be changed in mem-
ory programming. See pages 52, 53 for details.
Scan skips any memory channels in the selected cat-
egory/group/name that are set to "SKIP" or "PSKIP." (pgs.
52–54)
Link scan stops at the first channel when all channels in a
category/group are set to "SKIP" or "PSKIP." (pgs. 52–54)
IMPORTANT!: To perform scan functions, 2 or more
memory channels MUST be programmed, otherwise the
scans will not start.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
41