Icom IC-RX7 Instruction Manual page 62

7
MEMORY PROGRAMMING
D New NAME programming
q Push [r] or [s] (or rotate [DIAL]) to select the desired
information.
Selectable information:
• NAME • SKIP
• NEXT (Edit CH programming)
NAME
q P ush [ENT MW] (or [w]) to edit the name program-
ming.
w R otate [DIAL] to select the desired character.
• Push [r] or [s] to select the character group from "ABC"
(alphabetical characters; capital letters), "abc" (alphabetical
characters; lower case letters), "123" (numbers) or "!"#" (sym-
bols). See previous page for available characters details.
• Push [v] or [w] to move the cursor left or right, respectively.
• Push [CLR SQL] to clear the selected character.
• Push and hold [CLR SQL] to repeat clearing continuously.
54
• NUMBER
SKIP
q P ush [ENT MW] (or [w]) to edit the setting state.
w P ush [r] or [s] to select the desired setting, then
push [ENT MW].
NUMBER
q P ush [ENT MW] (or [w]) to enter the number input.
w E dit the desired 1 to 3 digit number with keypad.
• Duplicated number can not be assigned in the same cat-
egory.
• 0 to 9, 00 to 99, 000 to 999 can be assigned. Pushing
[ENT MW] requires for 1 or 2 digit numbers input.
w Push [s] (or rotate [DIAL]) to select "NEXT," then push
[ENT MW] to enter the CH programming state.
Or push and hold [ENT MW] for 1 sec. to program the
memory channel and return to the frequency indication.
• 1 short and 1 long beep sound.