Icom IC-RX7 Instruction Manual page 54

6
SEARCH AND SCAN OPERATIONS
w Push [v]/[w] once or twice to to select "CATEGORY,"
"GROUP" or "NAME."
e Push [r]/[s] (or rotate [DIAL]) to select the category
(group/name) to be skipped.
r Push [SKIP] to set the skip state.
• Push [SKIP] again to cancel the skip state.
t Push [ENT MW]
menu, and push [CLR SQL] to return to frequency indica-
tion.
46
several times to return to SCAN
(or [v] )
✔ CONVENIENT! (Group skip setting)
The group skip setting can be set with the following opera-
tion during a scan or scan holding state.
q Select the desired memory group to be skipped.
➥ Push [SCAN] to start a scan, then push [HOLD V] to
hold the scan.
➥ Push [v] or [w] to select the desired group.
• Push and hold [v] or [w] for 1 sec. to change the category.
w Push and hold [SKIP] for 1 sec., and rotate [DIAL] to select
the skip setting for the selected group from "ON (skip)" and
"OFF " then push [ENT MW].
,
✔ CONVENIENT! (Channel skip setting)
The channel skip setting can be set with the following opera-
tion during scan holding state.
q Select the desired memory channel to be skipped.
➥ Push [SCAN] to start a scan, then push [HOLD V] to
hold the scan.
➥ Rotate [DIAL] to select the desired channel.
• Push and hold [v] or [w] for 1 sec. to change the category,
or push [v] or [w] to change the group.
w Push [SKIP] several times to select the skip setting for the
selected channel from "SKIP," "PSKIP" and "OFF (no indica-
tion) "
.