I Call Channel Programming; Basic Operation - Icom IC-M1EURO V Instruction Manual

I Call channel programming

The call channel key can be programmed to your most often-
used channels in each channel group for quick recall.
q Push [DIAL•I/U] for 1 sec. once or
twice to select the desired channel
group to be pro-
(USA, INT)
grammed.
w Push [16•C] for 1 sec. to select the
call channel of the selected chan-
nel group.
• "CALL" and call channel number ap-
pear.
e Push [16•C] again for 3 sec.
long beep changes to 2 short beeps)
enter call channel programming
condition.
• Call channel number and channel
group to be programmed flashes.
TAG
INT
TAG CALL
INT
(until
TAG TAG CALL
to
USA
INT
r Push [Y]/[Z] to select the desired
channel.
t Push [16•C] to program the dis-
played channel as the call channel.
• The call channel number and channel
group stop flashing.
4

BASIC OPERATION

TAG CALL
INT
TAG TAG CALL
INT
11