I Setting Tag Channels; Scan Operations; I Starting A Scan - Icom IC-M1EURO V Instruction Manual

I Setting tag channels

For more efficient scanning, add desired channels as tag
channels or clear preset tag channels if they are unwanted
channels. Channels, set as non-tag channels will be skipped
during scanning. Tag channels can be assigned to each chan-
nel group independently.
(USA, INT)
q Select the desired channel group
[DIAL•I/U] for 1 sec., if desired.
w Select the desired channel to set as a tag channel.
e Push [SCN•TAG] for 1 sec., to be set the displayed chan-
nel as a tag channel.
• "TAG" appears in the function display.
r To cancel the tag channel setting, push [SCN•TAG] for 1
sec.
• "TAG" disappears.
• Clearing all tag channels in the selected channel group
➥ Turn power ON while pushing and holding [SCN•TAG] to
clear all tag channels in the channel group.
[Example]: Starting a normal scan.
TAG
INT
by pushing
(USA, INT)
Scan starts.
Push
TAG
TAG
INT
DUP

I Starting a scan

Set scan type, weather alert function, scan resume timer and
auto scan function in advance, using SET mode.
q Select the desired channel group
[DIAL•I/U] for 1 sec., if desired.
• When the weather alert function is in use, select the desired
weather channel with [DIAL] and the channel selector.
w Push [SCN] to start priority or normal scan.
• The comment indicator flashes "SCAN".
• The sub channel readout indicates "16" during priority scan.
• When a signal is received, scan pauses until the signal disap-
pears, or resumes after pausing for 5 sec. according to the SET
mode setting. (Channel 16 is still monitored during priority scan.)
Push [Y]/[Z]
• to check the scanning tag channels, to change
the scanning direction or resume the scan manually.
e To stop the scan, push [SCN].
• "SCAN" disappears.
• Pushing [PTT], [16•C], [DIAL] or [DW•TRI] also stops the scan.
Scan pauses when receiving a
signal and audio is emitted.
BUSY TAG
INT
5
SCAN OPERATION
(pgs. 17, 18)
by pushing
(USA, INT)
Push to stop
the scan.
TAG
13