D-Link DIR-300 User Manual page 30

Section 3 - Configuration
1. To enable WPA, WPA2, or WPA/WPA2 for a RADIUS
server, next to Security Mode, select Enable WPA
Only Wireless Security (enhanced), Enable WPA2 Only
Wireless Security (enhanced), or Enable WPA/WPA2
Wireless Security (enhanced).
2. Next to Cipher Type, select TKIP, AES, or Auto.
3. Next to PSK/EAP, select EAP.
4. Next to RADIUS Server 1 enter the IP Address of
your RADIUS server.
5. Next to Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
6. Next to Shared Secret, enter the security key.
7. If you have a secondary RADIUS server, enter its IP
address, port, and secret key.
8. Click Save Settings to save your settings.
D-Link DIR-300 User Manual 30