Big Pond - D-Link DIR-300 User Manual

Section 3 - Configuration
Choose Big Pond if your ISP uses a Big Pond connection. Your ISP will provide you with a username and password.
User Name:
Enter your Big Pond user name.
Password:
Enter your Big Pond password and then retype the
password in the next box.
Auth Server:
Enter the IP address of the login server.
Login Server IP:
Enter the IP address of the login server.
MAC Address:
The default MAC Address is set to the WAN's
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
The default MAC address is set to the WAN's
Clone MAC physical interface MAC address on the Broadband
Address: Router. You can use the "Clone MAC Address"
button to copy the MAC address of the Ethernet
Card installed by your ISP and replace the WAN
MAC address with the MAC address of the router.
It is not recommended that you change the default
MAC address unless required by your ISP.
D-Link DIR-300 User Manual
Internet Setup

Big Pond

3