Quick Operation Guide; Detailed Operation Guide - CYBEX 750T Owner's Manual

Quick Operation Guide

NOTE: Maximum user weight is 400 lbs. (181 kg).
The following is a quick overview of the operation of the treadmill. For more information read Detailed
Operation Guide in this chapter.
1. Place your feet on the two top steps located on each side of the running belt.
WARNING: Do not stand on the running belt when starting the treadmill. Always place your feet
2. Clip the e-stop clip onto your clothing and test it as described under Emergency Stop in the Safety
chapter.
3. Press the Programs, Manual or Fit Tests keys and follow the on-screen setup instructions or press
QUICK START to start the treadmill in Quick Start Manual mode.
4. If a program is selected, you will be prompted for workout Time, Level and Weight as appropriate.
Adjust these settings with the Speed + – keys and press Enter to proceed.
5. The treadmill begins a countdown, "BELT START IN 3...2...1," after which it accelerates the belt to
0.5 mph (0.8 kph) (for Manual Mode) or the speed of the program selected.
6. Hold the handrails while you step onto the running belt and begin walking.
7. Press the Speed + – keys to change the belt speed at any time. The right display will show the
current speed.
8. Press the Incline
9. Press the Stop key at any time to stop the running belt. Press again to exit to Dormant Mode and
return the incline to 0%.

Detailed Operation Guide

NOTE: Maximum user weight is 400 lbs. (181 kg).
1. Plug the treadmill power cord into a power outlet from a grounded, single phase, dedicated circuit, rated
for one of the following:
100 VAC, 50/60 Hz, 20A
115 VAC, 60 Hz, 20A
220 VAC, 60 Hz, 15A
230 VAC, 50 Hz, 15A
230 VAC, 50 Hz, 13A, UK.
2. Set the on/off switch to the on position.
WARNING: Do not stand on the running belt when starting the treadmill. Always place your feet
3. Place your feet on the two top steps located on each side of the running belt.
Operation
Page 3-2
Cybex 750T Treadmill Owner's Manual
on the two top steps when beginning a workout.
keys to change the incline at any time. The left display will show incline.
on the two top steps when beginning a workout.