3270 Host Configuration
SCS
MODEENT LOGMODE=SCS,FMPROF=X'03',TSPROF=X'03',PRIPROT=X'B1',
SECPROT=X'90',COMPROT=X'3080',RUSIZES=X'87C6',
PSERVIC=X'01000000E100000000000000',
PSNDPAC=X'01',SRCVPAC=X'01'
DSC4K MODEENT LOGMODE=DSC4K,FMPROF=X'03',TSPROF=X'03',PRIPROT=X'B1',
SECPROT=X'90',COMPROT=X'3080',RUSIZES=X'8787',
PSERVIC=X'03000000000018502B507F00'
AXIS HP MIO User's Manual
Appendix B: System Configuration Guidelines
The AXIS HP MIO board supports non-SNA (LU-0) 3270 DSC,
SNA LU-3 3270 DSE, and SNA LU-1 SCS data streams.
When printing in an SNA network, VTAM needs to be set up,
depending on desired LU type. The following VTAM logon-mode
entries apply to MVS, VM, and VSE.
The logon-mode entries are the same for all emulated IBM printers
(selected by the AXIS HP MIO IBM Printer Emulation parameter)
SNA LU-1 SCS:
SNA LU-3 3270 DSE:
You also need to match the Printer Emulation setting in AXIS HP
MIO with the setting of your 3270 printer driver software (JES/328x,
VPS, CMA-Spool, RSCS, etc.).
If there is no selection for 4224, 4230, 3812, or 3816, you can instead
select 3268.
(Continuation characters in column 72 are not shown)
HP MIO
39