Configuration From The System - Axis HP MIO User Manual

1001010100111
Section 4: Advanced Functions
11010001001
010011101
Configuration from the System
30
For printers without a front panel, you can configure the AXIS HP
MIO by inserting configuration commands in your document. The
example below shows a configuration sequence that sets all front panel
parameters to their default values (US version; for the European
version, substitute LETTER with A4):
Example:
%AXIS+
%CONFIG+
SYSL = 37;
PREMUL = 3816;
MPL = 66;
AUTORI = YES;
BIN1 = COR,LETTER;
BIN2 = COR,LETTER;
BIN3 = COR,LETTER;
BIN4 = COR,LETTER;
BIN5 = COR,LETTER;
SAVE;
%CONFIG-
Note that page orientation and size may be set individually for each
input bin, while the front panel parameters affect all available bins
simultaneously.
A common application is to print on pre-printed forms from the lower
bin, while printing standard jobs from the upper bin. To do this, you
may need to turn off the COR (Computer Output Reduction)
function for the lower bin:
Example:
%AXIS+
%CONFIG+
BIN2 = PORT,LETTER;
SAVE;
%CONFIG-
AXIS HP MIO User's Manual