Automatic Orientation (Autori) - Axis HP MIO User Manual

System language
Section 3: Configuration
Page lenght
Emulation

Automatic Orientation (AUTORI)

Automatic
Orientation
Selections:
22
This parameter selects automatic or fixed page orientation.
The default selection is YES (Automatic Orientation). You can change
this to NO if you want to print all pages in the same orientation
regardless of the calculated (logical) page size, see below.
Select
/deselect Automatic Orientation.
YES: Automatic Orientation. The page orientation depends on the
page format set by the IBM host. For each new page, a logical
page size is calculated and compared to the physical size set by
the Page Size parameter, see page 24. The page orientation is
then determined as follows:
• If the logical length is greater than the logical width, the
page will be printed in Portrait orientation.
• If the logical length is less than or equal to the logical
width, the page will be printed in Landscape orientation.
• If the logical page size doesn't fit the page in either
orientation, the page will be printed according to the Page
Orientation parameter, see page 23.
NO: Fixed Orientation. The page will always be printed according
to the Page Orientation parameter, see page 23.
AUTORI=YES
S
AXIS HP MIO User's Manual
*