Tuning In Radio Stations - Denon AVR-3311 Owner's Manual

ENGLISH
Playing an iPod ®
iPod play function
iPod PLAY
If is pressed when power of this unit is on standby and a
control dock for iPod or an iPod (USB) is connected, the iPod starts
playback.
iPod PLAY
Press .
• Power of this unit is turned on.
• This unit's input source switches to
"DOCK" or "NET/USB".
• iPod playback starts.
iPod PLAY
If on the main unit is pressed, the
same function as with the remote control unit
can be obtained.
NOTE
• iPod play function does not function if a control dock for iPod
("DOCK") or an iPod ("NET/USB") is not connected.
• If both a control dock for iPod ("DOCK") and an iPod ("NET/USB")
are connected, playback with control dock for iPod ("DOCK") takes
priority.
28

Tuning in radio stations

Listening to FM/AM broadcasts
1
TUNER
Press to switch the input
source to "TUNER".
2
Press BAND to select "FM" or
"AM".
FM When listening to an FM broadcast.
AM When listening to an AM broadcast.
TUNER
AUTO
Now Playing
FM 87.50MHz
CH A1
Tuning Band Mode
/
Preset Memory Search
CH+/- MEMORY SEARCH
3
Tune in the desired broadcast station.
q To tune in automatically (Auto tuning)
MODE
Press to light the "AUTO" indicator on the display, then
TUNING d TUNING f
use or to select the station you want to
hear.
w To tune in manually (Manual tuning)
MODE
Press to turn off the display's "AUTO" indicator, then use
TUNING d TUNING f
or to select the station you want to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
TUNING f
to change frequencies continuously.
• You can specify the duration of the on-screen display to be displayed
(default: 30 sec) at menu "TUNER" (vpage 83). Press
return to the original screen.
n Presetting radio stations (Manual preset)
Your favorite broadcast stations can be preset so that you can tune
them in easily. Up to 56 stations can be preset.
• Stations can be preset automatically at "Auto Preset"
(vpage 64). If "Auto Preset" is performed after performing "Manual
Preset", the "Manual Preset" settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
Press MEMORY .
3
SHIFT
Press to select the block
(A to G) in which to preset the
channel (1 to 8 per block), then
press CH + , CH – or
the preset number.
4
MEMORY
Press again to complete
the setting.
• To preset other stations, repeat steps 1 to
4.
Default settings
Block (A – G)
and
Channel (1 – 8)
87.5 / 89.1 / 98.1 / 108.0 / 90.1 / 90.1 / 90.1 /
A1 – A8
90.1 MHz
522 / 603 / 999 / 1404 / 1611 kHz,
B1 – B8
90.1 / 90.1 / 90.1 MHz
C1 – C8 90.1 MHz
TUNING d
or
D1 – D8 90.1 MHz
E1 – E8 90.1 MHz
uio p to
F1 – F8 90.1 MHz
G1 – G8 90.1 MHz
Specify a name for the preset broadcast station
(Preset Name) (vpage 64)
1 – 8 to select
Default Settings