Denon AVR-3311 Owner's Manual page 87

Setting items
GUI Wall Paper : Set wallpaper to display in the background when playback
(Continued) is stopped, etc.
• Picture : Set the background to a picture (DENON logo).
• Black : Set the background to black.
Format : Set the video signal format to be output for the TV you are using.
• NTSC : Select NTSC output.
• PAL : Select PAL output.
"Format" can also be set by the following
procedure. However, the menu screen is not
displayed.
1. Press and hold the main unit's
RETURN
and
"Video Format" appears on the display.
2. Press o p
3. Press the main unit's
to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Text : Display the details of operation when switching surround mode,
input mode, etc.
• ON : Turn display on.
• OFF : Turn display off.
Master Volume : Display the master volume during adjustment.
• Bottom : Display at the bottom.
• Top : Display at the top.
• OFF : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
NET/USB : Set the NET/USB screen display time when the input source
is "NET/USB".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote control operation
buttons
Setting details
AUDYSSEY DSX
for at least 3 seconds.
and set the video signal format.
ENTER MENU RETURN
, or
Move the cursor
(Up/Down/Left/Right)
Setting items
GUI TUNER : Set the tuner screen display time when the input source is
(Continued) "TUNER".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "iPod (USB)".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Preset Codes See "Registering preset codes" (vpage 87).
Search a preset code to
register in the remote
control unit.
• Up to 16 characters can be input.
Quick Select Name
Change the "Quick Select" • For character input, see page 61.
display title to one you
prefer.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 61.
each zone to one you prefer.
Trigger Out Trigger Out 1 / Trigger Out 2
Select the condition for
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
activating Trigger Out 1/2 for
Trigger out is activated through linkage to the power of the zone set
the input source, surround
to "ON".
mode, etc.
n When setting for input source
See "TRIGGER OUT jacks"
Activate trigger out when the input source set to "ON" is selected.
(vpage 23) for more
information on trigger out.
Active for the zone set to "ON" with "When Setting for Zone".
n When setting for surround mode
Activate trigger out when the surround mode set to "ON" is selected.
Active when the "MAIN ZONE" set to "ON" with "When Setting
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to "ON" is selected.
Active when the "MAIN ZONE" set to "ON" with "When Setting
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
Confirm the setting
ENGLISH
Manual Setup
Setting details
83
Return to previous menu