Tuning In Radio Stations - Denon S-5BD Owner's Manual

Tuning in Radio Stations

Listening to FM/AM Broadcasts
1
Press TUNER to select "FM" or
"AM".
FM When listening to an FM broadcast.
AM When listening to an AM broadcast.
2
Tune in the desired broadcast
station.
q To tune in automatically (Auto Tuning)
MODE
Press to light the "AUTO" indicator
TU d TU f
on the display, then use or
select the station you want to hear.
TU d
• To cancel Auto tuning, press
TU f
.
w To tune in manually (Manual Tuning)
MODE
Press to turn off the display's
TU d TU f
"AUTO" indicator, then use or
to select the station you want to hear.
Adjusting the Master Volume (vpage 28)
n
VOL df
Press .
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
change frequencies continuously.
Presetting Radio Stations (Manual Preset)
Your favorite broadcast stations can be preset so that you can tune
Front
them in easily. Up to 56 stations can be preset. Multicasts can also
be preset.
• Stations can be preset automatically at "Auto Preset" (vpage
48). If "Auto Preset" is performed after performing "Manual Preset",
the "Manual Preset" settings will be overwritten.
1
Tune in the broadcast station you
want to preset.
2
MEMO
Press
to
3
Press SHIFT
G) in which the channel (1 to 8 per
or
a block) is to be preset, then press
CHANNEL +, –
preset number.
4
Press MEMO
setting.
To preset other stations, repeat steps 1
to 4.
Default Settings
n
TU d TU f
or to
Block (A – G)
and
Channel (1 – 8)
A1 – A8
B1 – B8
C1 – C8
D1 – D8
E1 – E8
F1 – F8
G1 – G8
n Specify a Name for the Preset Broadcast Station
(Preset Name) (vpage 48)
Front
.
to select the block (A to
1 – 8
or to select the
Rear
again to complete the
Default Settings
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 / 90.1 /
90.1 MHz
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
90.1 / 90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
90.1 MHz
Listening to Preset Stations
1
SHIFT
Press to select the memory
block.
2
Press CHANNEL +, – or 1 – 8
select the desired preset channel.
You can also operate via the main unit. In this
case, perform the following operations.
PRESET + PRESET –
Press or to select the
preset radio station.
Direct Frequency Tuning
You can enter the receiving frequency directly to tune in.
1
SEARCH
Press .
2
0 – 9
Input frequencies using .
• If o is pressed, the immediately preceding
input is cancelled.
3
When setting is completed, press
ENTER
.
The preset frequency is tuned in.
ENGLISH
Front
to
Rear
Rear