Connecting A Cd Player; Connecting A External Power Amplifier - Denon AVR-3311 Owner's Manual

Connecting a CD player

• You can enjoy CD sound.
• Select the connector to use and connect the device.
Cables used for connections
Audio cable (sold separately)
(White) L
Audio cable
(Red)
R
CD player
AUDIO
AUDIO
OUT
L R
L R
L R
in Set as Necessary
Set this to change the digital input connector to which the input
source is assigned.
"Input Assign" (vpage 64)

Connecting a external power amplifier

• You can use this unit as a pre-amp by connecting a commercially
available power amp to the PRE OUT connector. Adding a power amp
to each of the channels provides an even greater sound presence.
• Select the terminal to use and connect the device.
Cables used for connections
L
Audio cable (sold separately)
R
(White)
Audio cable
(Red)
Audio cable
Power amplifier
AUDIO
SUB- FRONT CENTER
WOOFER
L R
L R
L R
• When using just one surround back speaker, connect it to the left
channel (L) terminal.
• Use the volume control on the subwoofer to control subwoofer
volume.
• If the subwoofer volume sounds low, use the volume control
provided on the subwoofer to adjust the volume.
L L
NOTE
R R
• When speakers have been connected to PRE OUT terminals, do not
connect the speakers to the speaker terminals.
• The output channels for the PRE OUT connector change to SBL and
SBR in the "Amp Assign" (vpage 75) settings in the menu.
SURROUND SURROUND
BACK
L R L R
L R L R
L R L R
.
ENGLISH
21