Basic Operation - Denon AVR-4308 Owner's Manual

ENGLISH
<SOURCE SELECT>
uiop
ENTER
[ NET/DTU]
( mode)
[A ~ G]
ENTER
uiop
[SEARCH]
[1 ~ 8]
About the button names in these explanations
< >
: Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Basic Operation
1
Make the necessary preparations.
q Check the network environment, then turn on the AVR-4308's
power. (vpage 21 "Network Audio")
w If settings are required, make the network settings.
(vpage 33 ~ 35 "Network Setup")
e Prepare the computer. (vComputer's operating instructions)
Install "Windows Media Player ver. 11" .
2 2
Either turn
(AMP mode) to select "NET/USB". (AMP mode) to select "NET/USB".
: "Source Select" –"NET/USB" –"Play"
(vpage 39)
3
To operate using the main remote control unit, set the
remote control unit to the NET/DTU (
(vpage 64 "Remote Control Unit Operations")
4
ui
Use to select the menu, then press
to select the fi le you want to play.
5
ENTER
[MEMO]
Press
Playback starts.
[NET/USB]
(AMP mode)
<SOURCE SELECT> [NET/USB]
or press
) mode.
ENTER
or p
or p.
Stopping playback temporarily
During playback, press ENTER.
Press again to resume playback.
To stop
During the play or pause mode, press and hold ENTER.
Searching up or down pages
Press [SEARCH], then press o (down) or p(up).
To cancel, press ui or [SEARCH].
Searching by fi rst letter
(Character search)
This operation is convenient for choosing items from the menu screens
for Internet radio stations or fi les stored on the computer.
q When the menu screen is displayed, press [SEARCH] twice.
w Use o p to select the fi rst letter you want to search for.
If there are multiple items starting with the selected letter, they are
displayed in alphabetical order.
If it is not possible to search the list, "unsorted list. " is displayed.
• Use the RESTORER mode to expand the low and high frequency
components of compressed audio fi les and achieve a richer sound.
The default setting is "Mode3" .
• The time for which the GUI menus are displayed can be set at GUI
menu "Manual Setup" – "Option Setup" – "GUI" – "NET/USB"
(vpage 36).
• The display can be switched between the artist name, track name,
album name.