Denon AVR-4308 Owner's Manual page 38

ENGLISH
Wireless LAN settings
Make settings for wireless LAN.
Turn on the AVR-4308's power.
The mode automatically switches to "Wireless" .
Display GUI menu "Manual Setup" – "Network Setup" .
To search for the network automatically
Search
If searching is possible, the
access points are displayed.
Select the access point to
be set.
Without security
Connection (continued on right page)

If no Ethernet cable is connected
Access point settings
To set manually
"Detail" setting
q Input the SSID.
w If there is security, select
the encryption method.
e Input the encryption key.
If searching is not possible
r If "WEP" was selected in
step w, select the default
key.
Normally select "1" .
Make the SSID setting at
"Manual" .
With security
Input the encryption key.
For WEP , also input the
default key.
To acquire the IP address automatically
using the DHCP function
z
To not pass through the proxy server
z: This is the fl ow for infrastructure type communications. For ad-hoc communications, set "Mode" at
the "Detail" settings to "Ad-hoc" .
NOTE Knowledge about networks is required to make the IP address and proxy settings. For details,
consult a network administrator.
Connection
To enter the IP address manually
At the GUI menu "Manual Setup" – "Network
Setup" – "Detail" setting, set "DHCP" to "OFF"
and enter the IP address, subnet mask, default
gateway, primary DNS and secondary DNS.
To connect via proxy server
This setting is required
when the network is
established
servers.
At the GUI menu "Manual Setup" – "Network
Setup" – "Proxy" setting, set "Proxy" to "ON"
and enter the address or domain name and
port numbers.
This completes the setting.
via proxy