Table of Contents
Advertisement
9.
REGISTRATION
Your new telephone system can accommodate up to 12 handsets. You can add new handsets to your telephone system, but each device must
be registered with the telephone base before use.
9.1
Register a handset
M
1. Press
when in idle mode to enter the feature menu.
U
D
2. Press
/
to select REGISTER HS.
3. Enter the system PIN. (Default is 0000.)
M
4. Press
, and display will show PRESS AND HOLD PAGE BUTTON!.
P
5. Press and hold
on the base. Handset display will show REGISTERING.... The handset will display HANDSET X, with X denotes the
handset number (1-12), if registration is successful.
NOTES:
1. If the registration is not successful, the display will show NO BASE FOUND. To reset the handset, remove the handset from the telephone
base and place it back in. Try the registration process again.
2. You cannot register a handset if any other system handset is in use.
9.2
De-register all handsets
You may need to de-register your handsets if you have twelve registered handsets and need to replace a unit. Or you wish to change the
designated handset number of your registered handsets.
You must first de-register ALL the handsets, and then re-register each handset you wish to use.
Please read carefully through all the instructions on this page before beginning the de-registration process.
M
1. Press
when in idle mode to enter the feature menu.
U
D
2. Press
/
to select DE-REGISTER HS.
3. Enter the system PIN. (Default is 0000.)
M
U
D
4. Press
and
/
31
to select the desired handset.
Advertisement
Table of Contents
