Set The Remote Access Code - VTech LS6225 User Manual

To remotely access your answering system:
1. Dial your telephone number from another telephone.
2. When the system answers, enter * and the four-digit remote access code (default remote access code is 0000).
3. You can also enter the following remote commands.
4. Hang up to end the call and save all undeleted messages.
Keys
During Message Playback
2 Delete message
4 Press once to repeat playing the current
message from the beginning. Press
twice to skip backward to the previous
message.
5 Stop playing message
6 Skip forward
7
9
*
10.9

Set the remote access code

M
1. Press to show the menu when the handset is not in use.
M
2. Press to select ANS. SYSTEM.
U D
3. Press / to select REMOTE PIN, and then press
4. Enter your 4-digit security code. Default is 0000. Press
M
5. Press to enter the new PIN code.
M
6. Press to confirm the new PIN code.
M
7. Press to save the settings.
Description
Message is not playing
Play message
Turn on the answering machine
Turn off the answering machine
Enter the remote access code if the
answering machine is on and during
OGM playing.
M
.
m
to delete digit while entering.
38